ECtr-cast
Epoxy casting system used for mass castings with thicknesses greater than 1 inch. Designed for casting, potting and embedding applications.
ECtr-uv cast
UV resistant epoxy casting system used for mass castings with thicknesses greater than 1 inch.
ECT-CF
Epoxy crack filler, system designed to repair and fill vertical or horizontal cracks. It has excellent adhesion to concrete, masonry, wood, metal and plastics.
ECT-CF FC
Fast cure epoxy crack filler, designed to repair vertical or horizontal cracks. It has excellent adhesion to concrete, masonry, wood, metal and plastics.
ECT-CF SFC
Super-fast curing epoxy system designed to repair vertical or horizontal cracks. It has excellent adhesion to concrete, masonry, wood, metal and plastics.
ECTM
Solvent-less epoxy-polyurethane membrane designed to protect substrates against water infiltration which exhibits high elongation and a high resistance to tearing.
ectr
Standard self-leveling epoxy coating used to restore deteriorated floors or protect new floors. It provides excellent resistance to abrasion & chemical resistance.
ECTR-FC
Epoxy coating designed for fast cure priming applications with a recoat time ranging between 3-4 hours. It yields a seamless glossy finish, and a high covering power.
ECTR-FC 70/30
Epoxy coating designed for fast cure priming and decorative flake applications with a re-coat time ranging between 2-3 hours.
ECTR-FC 80/20
Epoxy coating designed for fast cure priming and also decorative flake applications with a re-coat time ranging between 1-3 hours.
ECTR-3
Epoxy-polyurethane hybrid coating that exhibits excellent appearance and physical properties. It was specifically designed to be used as a wear coat for the ECTM-FLEX membrane.
ECTR-CTOP
Clear countertop epoxy used for indoor applications on counter and bar tops. This is a food safe product perfect for refinishing outdated kitchen countertops.
ECTR-LV
Low viscosity epoxy primer coating system allowing for superior penetration in concrete substrates. Can also be used as a finish coat under circumstances where a longer pot life is required.
ECTR-MVB
100% solid moisture vapor barrier epoxy coating designed for controlling the moisture vapor emission rate on deteriorated or new floors.
ECTr-VRM
Vapor reduction membrane epoxy coating designed for controlling the moisture vapor emission rate on deteriorated or new floors.